参考资料
Chemical Effects Calculator
打印结果
产品
泳池容积
请先选择支持的产品后再进行计算。
注意事项
- • 换水计算器
- • 在向泳池中添加任何物质之前,请仔细核对投加量、产品及重新检测的时间。
- • 当 CYA 或盐分需要降低而非升高时,请规划换水稀释方案。
Reference matrix
硼酸盐
| 硼酸盐效应为近似值,并作为硼酸盐当量进行估算。 | 提高硼酸盐。 | SWG 检测 | 硼酸 |
|---|---|---|---|
| FC | Liquid chlorine, cal-hypo, dichlor, SWG output | Sunlight, bather load, organics, time | FC and CC after the water fully mixes |
| pH | Soda ash, borax, aeration, some source water | Muriatic acid, dry acid, acid demand | pH and TA after circulation |
| TA | Baking soda, soda ash, borax, high-TA fill water | Muriatic acid, dry acid, acid rain, CO2 loss over time | TA and pH after the adjustment mixes in |
| CH | Calcium chloride, cal-hypo, high-CH fill water | Dilution, partial drain/refill | CH and CSI after the change |
| CYA | Dry stabilizer, dichlor, trichlor | Dilution, partial drain/refill, splash-out | CYA and FC target after the stabilizer dissolves |
| salt | Pool salt, SWG output, salty fill water | Dilution, partial drain/refill, backwash | Salt and the SWG reading |
| borates | Boric acid, borax | Dilution, partial drain/refill, backwash | Borates and pH after the dose fully circulates |
| CSI pressure | Higher pH, TA, CH, temperature, and often salt | Acid, lower TA, lower CH, dilution, cooler water | pH, TA, CH, temperature, and salt before trusting CSI |