Chemical Effects Calculator
이 참조 가이드를 통해 FC, pH, TA, CH, CYA, 염분, 붕산염 및 CSI 압력을 높이거나 낮추는 방법을 확인하세요. 농도 방식의 영향은 추정치이며, pH 및 CSI는 방향성 수치로만 표시됩니다.
화학적 영향 계산
기본 설정값은 각 화학 물질에 대한 표준 수영장 제품 가정치를 따릅니다.
가정 사항
FC, CYA, CH, 염분 및 붕산염은 농도 방식의 추정치입니다. pH 및 CSI 압력은 정확한 선형 출력값으로 취급되지 않습니다.
- • 본 페이지는 선택기에서 표시된 제품 라벨 농도를 기준으로 합니다.
- • 추가 조치를 하기 전에 물이 완전히 혼합된 후 다시 측정하십시오.
- • 산과 소다 애쉬는 pH를 변화시키지만, 여기서 제공되는 pH 반응은 방향성 정보만 제공합니다.
참조 매트릭스
각 수영장 매개변수를 높이거나 낮추는 일반적인 요인과 다음에 재측정해야 할 항목을 빠르게 확인하세요.
| 매개변수 | 증가 요인 | 감소 요인 | 재측정 |
|---|---|---|---|
| FC | Liquid chlorine, cal-hypo, dichlor, SWG output | Sunlight, bather load, organics, time | FC and CC after the water fully mixes |
| pH | Soda ash, borax, aeration, some source water | Muriatic acid, dry acid, acid demand | pH and TA after circulation |
| TA | Baking soda, soda ash, borax, high-TA fill water | Muriatic acid, dry acid, acid rain, CO2 loss over time | TA and pH after the adjustment mixes in |
| CH | Calcium chloride, cal-hypo, high-CH fill water | Dilution, partial drain/refill | CH and CSI after the change |
| CYA | Dry stabilizer, dichlor, trichlor | Dilution, partial drain/refill, splash-out | CYA and FC target after the stabilizer dissolves |
| salt | Pool salt, SWG output, salty fill water | Dilution, partial drain/refill, backwash | Salt and the SWG reading |
| borates | Boric acid, borax | Dilution, partial drain/refill, backwash | Borates and pH after the dose fully circulates |
| CSI pressure | Higher pH, TA, CH, temperature, and often salt | Acid, lower TA, lower CH, dilution, cooler water | pH, TA, CH, temperature, and salt before trusting CSI |
본 내용은 교육용 가이드일 뿐입니다. 조치를 취하기 전 반드시 라벨, 매뉴얼, 현지 규정 및 현장 상태를 확인하십시오. 전기, 가스, 구조, 배수, 익사, 부상, 비상 상황 또는 화학 물질 혼합 위험이 있는 경우 즉시 중단하십시오.