Referencia
Chemical Effects Calculator
Imprimir resultado
Producto
Volumen de la piscina
Elija un producto compatible antes de calcular.
Advertencia
- • Calculadora de intercambio de agua
- • Revise la dosis, el producto y el tiempo de reanálisis antes de añadir cualquier cosa a la piscina.
- • Planifique la dilución cuando necesite que CYA o la sal bajen en lugar de subir.
Consulta rápida sobre qué suele aumentar o disminuir cada parámetro de la piscina y qué analizar a continuación.
Boratos
| El efecto de borato es aproximado y se trata como una estimación de equivalente de borato. | Aumenta los boratos. | Presión CSI | Ácido bórico |
|---|---|---|---|
| FC | Liquid chlorine, cal-hypo, dichlor, SWG output | Sunlight, bather load, organics, time | FC and CC after the water fully mixes |
| pH | Soda ash, borax, aeration, some source water | Muriatic acid, dry acid, acid demand | pH and TA after circulation |
| TA | Baking soda, soda ash, borax, high-TA fill water | Muriatic acid, dry acid, acid rain, CO2 loss over time | TA and pH after the adjustment mixes in |
| CH | Calcium chloride, cal-hypo, high-CH fill water | Dilution, partial drain/refill | CH and CSI after the change |
| CYA | Dry stabilizer, dichlor, trichlor | Dilution, partial drain/refill, splash-out | CYA and FC target after the stabilizer dissolves |
| salt | Pool salt, SWG output, salty fill water | Dilution, partial drain/refill, backwash | Salt and the SWG reading |
| borates | Boric acid, borax | Dilution, partial drain/refill, backwash | Borates and pH after the dose fully circulates |
| CSI pressure | Higher pH, TA, CH, temperature, and often salt | Acid, lower TA, lower CH, dilution, cooler water | pH, TA, CH, temperature, and salt before trusting CSI |