Referenz
Chemical Effects Calculator
Ergebnis drucken
Produkt
Poolvolumen
Wählen Sie ein unterstütztes Produkt aus, bevor Sie die Berechnung starten.
Hinweis
- • Rechner für Wasserwechsel
- • Überprüfen Sie Dosierung, Produkt und Testzeitpunkt, bevor Sie etwas in den Pool geben.
- • Planen Sie eine Verdünnung, wenn CYA oder Salz gesenkt statt erhöht werden muss.
Schnellübersicht darüber, was typischerweise welchen Poolparameter erhöht oder senkt und was als Nächstes getestet werden sollte.
Borate
| Die Borat-Wirkung ist eine ungefähre Schätzung, die als Borat-Äquivalent behandelt wird. | Erhöht Borate. | CSI-Druck | Borsäure |
|---|---|---|---|
| FC | Liquid chlorine, cal-hypo, dichlor, SWG output | Sunlight, bather load, organics, time | FC and CC after the water fully mixes |
| pH | Soda ash, borax, aeration, some source water | Muriatic acid, dry acid, acid demand | pH and TA after circulation |
| TA | Baking soda, soda ash, borax, high-TA fill water | Muriatic acid, dry acid, acid rain, CO2 loss over time | TA and pH after the adjustment mixes in |
| CH | Calcium chloride, cal-hypo, high-CH fill water | Dilution, partial drain/refill | CH and CSI after the change |
| CYA | Dry stabilizer, dichlor, trichlor | Dilution, partial drain/refill, splash-out | CYA and FC target after the stabilizer dissolves |
| salt | Pool salt, SWG output, salty fill water | Dilution, partial drain/refill, backwash | Salt and the SWG reading |
| borates | Boric acid, borax | Dilution, partial drain/refill, backwash | Borates and pH after the dose fully circulates |
| CSI pressure | Higher pH, TA, CH, temperature, and often salt | Acid, lower TA, lower CH, dilution, cooler water | pH, TA, CH, temperature, and salt before trusting CSI |